Your cart is empty

Noise-reduction Headset f/FD-150A FD-450A FD-160A 80bM

$112.99


This heavy-duty headset lives up to the demand under extremely high-noise environment in air-piloting and car-racing. It is best used in manufactory plants as well.

Built of Acrylonitrile Butadiene Styrene (ABS), the dome of the speaker is hard, durable and heat-resistant. Layers of sponge filter ensure high passive noise reduction level (NRR) of 24dB, which means a reduction of the amount of background noise reaching your ears. The three-layered thick earpad create a seal around each of your ear from the high noise environment.

The speakers are connected by a metal frame which crosses behind your head. Though the sturdy material of the speakers are a bit weighty, the Velcro taped headstraps with which you wear the headset relieves much of the weight and provides adjustable, comfortable wearing experience.

The electret microphone offers consistent and accurate transmission. It is connected to the headset with a strong metal frame which helps adjusting it to the most suitable position while not getting loose.

Here are some of the exceptional features of the heavy-duty headset:

Technical Specifications of Speakers
Passive Noise Reduction Rating 24dB
Impedance 8Ω +/- 15% at 1.0v, 800Hz
Resonant Frequency 200Hz +/- 20% (without baffle)
Output SPL 99dB +/- 3dB (at 1W Zxis Calculated)
Frequency Response 15kHz
Rated Frequency Range 15kHz
Rated Power Input 0.5W
Max Power Input 0.6W
Distortion 5% Max (rated power input 1000Hz)
Load test Noise 0.5W in 24 hours
Heat test: 50+/-2C and 20-25% R.H. in 5 hours
Humidity test 40+/-2C and 90-95% R.H. in 5 hours
Cold test -25 C in 16 hours
Technical Specifications of Microphone:
Sensitivity -43dB (f=1kHz, 0dB=1V/Par VS=4.5V, R=1.0kΩ)
Output Impedance 1.0 kΩ (f=1KHz);
Current Consumption 500μA (VS=4.5V, RL=1.0KΩ)
Signal to Noise Ratio 40dB;
Decreasing Voltage -3dB (VS=3.0V to 1.5V)
Soldering heat shock +/-3dB (350+/-5C in 3 minutes)
Storage temperature range -40C~+80C;
Operation temperature range -40C~+70C;
High temperature test: 55+/-2C in 2 hours;
Humidity test 40+/-2C and 93+2/-3% R.H. in 48 hours
Low temperature test -20+/-3C;
Vibration test frequency range=10~30~10Hz, amplitude=0.55mm; time for each period=3 min.; total time=30min; frequency range=30~55~30Hz, amplitude=0.15mm; time for each period=3 min.; total time=30min.


Compatible two-way radio models:

 


For MOTOROLA handheld Radio :

ECP100
CP88, CP100, CP150, CP200,CT150, CT250, CT450, CT450LS ,GP68, GP88, GP88S, GP300, GP308, GP350, GP2000
GTI, GTX, LTS2000, VL50, VL130,P040, P080, P110, P200, P1225, P1225LS, PR400
PRO1150, PRO2150, PRO3150, PMR446,SP10, SP21, SP50, XTN446, XTN500, XTN600
XV1100, XV2100, XV2600, XU1100, XU2100, XU2600,CLS1110, CLS1410, CLS1413, CLS1450, CLS1450C
Spirit MU-11C, MU21CV, MU-22CVS, MU-24CVS, MV-11C, MV-21CV, MV-22CVS, MV-24CVS

Compatible with model XTN, CLS, M series radios ..etc.


For Feidaxin handheld Radio :
FD-150A ,FD-450A ,FD-160A , FD-460A

PACKAGE CONTAIN

 

1 xNoise-reduction Headset ( Colour BLACK)
1 xRadio connect cable with PTT switch .
1 xFor 2 pin plug ( fit for Motorola 2 pinstandard)


Add to Cart:

  • Model: _2956
  • 100 Units in Stock



This product was added to our catalog on Tuesday 08 September, 2009.